Field Service Engineer — Slovenia & Central/Eastern Europe
Specialized in diagnostics, maintenance, and automation of industrial machinery. Authorized support for Meech static control systems and Zünd digital cutting systems. Factory-trained on Domino, ABG, GEW, and Eurolaser equipment across printing, packaging, and converting industries.
From preventive maintenance and fault diagnostics to system automation, equipment installation, and machine relocation — comprehensive industrial field service across Slovenia and the Central/Eastern Europe.
Preventive and corrective maintenance for printing, packaging, and converting equipment. On-site fault diagnostics for ABG, GEW, Domino, and Astronova systems across Slovenia and 12 countries. I isolate faults, replace components, and verify performance to minimize production downtime and keep your lines running.
Upgrading existing equipment with modern control components, PLC programming, and HMI interfaces. I optimize production workflows, retrofit older converting and printing lines, and integrate new sensors or drives. The goal: higher throughput, lower energy consumption, and extended machine lifespan.
Full assembly and commissioning of industrial systems. I specialize in Zünd digital cutting tables, Eurolaser CO2 laser systems, and Meech static control and web cleaning installations. From mechanical setup through software configuration to operator handover and training.
Comprehensive support for the relocation of printing machines, converting lines, and digital cutting tables. Professional disassembly, transport preparation, rigging coordination, reassembly, leveling, and full calibration at the new location. I ensure the machine runs to factory spec after every move.
Specialist for Domino N610i, K600, and industrial UV Inkjet print heads in label and packaging lines. I handle ink system maintenance, print head alignment, nozzle recovery, and GEW UV curing system servicing. From DOD marking systems to high-speed digital inkjet integration.
Modern industry requires digital support. I build dedicated web applications for production monitoring, internal tools, and data management using Pulse Engine — a proprietary PHP framework. I also create technical websites with multi-language support and SEO-first architecture.
Nearly two decades of hands-on field service experience, backed by official factory training from Meech, Zünd, ABG International, GEW, Domino, and Astronova Trojan. Authorized for Meech static control systems and Zünd digital cutting systems.
In-depth knowledge and years of experience maintaining these brands:
Actively performing services and projects across Slovenia, Croatia, and the wider Central/Eastern Europe region:
I am actively involved in system support for the brands below, working in close cooperation with their local representatives. As part of their service team, I ensure your equipment is maintained according to manufacturer standards.
Static Control & Web Cleaning
I provide authorized installation and maintenance of Meech static elimination and web cleaning systems. Static charges cause material misfeeds, dust contamination, and print defects in converting, printing, and packaging lines. Meech solutions neutralize static buildup and remove surface particles, improving product quality and reducing waste across roll-to-roll and sheet-fed production.
Typical applications: Flexo and digital printing, label converting, packaging lines, plastics extrusion, pharmaceutical blister packing, and film lamination.
Distributor: Animat d.o.o. https://meech.com/
Digital Cutting Systems
I am authorized for complete installation and maintenance of Zünd modular digital cutting systems. These flatbed cutters handle signage, packaging, textiles, composites, and leather with unmatched precision. My work covers machine setup, commissioning, blade and tool calibration, software configuration, and ongoing preventive maintenance across the full Zünd product range.
Typical applications: Signage and displays, packaging prototypes, textile cutting, composite and gasket production, automotive interiors, and leather goods.
Distributor: Sportera d.o.o. https://www.zund.com/en
CO2 Laser Systems
I service Eurolaser CO2 laser cutting and engraving systems for non-metallic materials including textiles, acrylics, wood, foam, and composites. From small-format universal cutters to large-format textile processing systems, I handle installation, commissioning, optics alignment, preventive maintenance, and fault diagnosis.
Typical applications: Acrylic signage, textile cutting, wood engraving, foam and gasket production, filter media, architectural models, and POS displays.
Distributor: Sportera d.o.o. https://www.eurolaser.com/
My goal is for your production to run flawlessly. When I encounter challenges that exceed my scope of work, I turn to a network of reliable companies and independent engineers with whom I have successfully collaborated for many years.
Electrical field specialist
Years of hands-on experience and deep knowledge in industrial electrical systems, automation, and machinery maintenance.
Official distributor for Meech Static Eliminators Ltd
Offering comprehensive solutions for static charge management and surface cleaning across printing, packaging, and converting industries.
Technology development and embedded systems experts
A team of engineers with deep experience in electronics design, from concept through prototype to production-ready devices.
Your first choice for digital material cutting
Providing industry-leading digital cutting and laser systems for precision processing of virtually any material.
Mechanical and electronics engineering
Full-cycle development of mechanical components and electronic circuits, from 2D/3D modeling and schematic design through PCB layout to working prototypes.
Reliable IT partner for businesses
Comprehensive IT support for small and large companies, from cloud infrastructure and data security to hardware procurement and on-site service.
Everything you need to know about industrial maintenance services, response times, pricing, maintenance contracts, and the brands I support across Slovenia, Croatia, and the wider Central/Eastern Europe.
I provide preventive and corrective maintenance, fault diagnostics, troubleshooting, and repair of industrial machinery. My services also include system automation upgrades, equipment installation and commissioning, machine relocation, operator training, and technical consulting. I am authorized for installation and maintenance of Meech static control and cleaning systems and Zünd digital cutting systems.
I provide authorized support for Meech International (Hyperion™ ionising bars, CyClean™, VacClean™) and Zünd Systemtechnik digital cutting systems. I am factory-trained with extensive hands-on experience servicing ABG International (Digicon, Omega, Vectra, Horizon, FleyeVision), GEW UV curing systems, Domino inkjet systems (N610i, K600), Astronova Trojan print engines, and Eurolaser CO2 laser systems. I also work with PLC controllers, HMI systems, and most standard industrial equipment.
I hold nearly two decades of field service experience in industrial environments. I am authorized for installation and maintenance of Meech products (Hyperion™, CyClean™, VacClean™) and Zünd cutting systems (G3, S3, D3, Q-Line). I completed official factory training programs with ABG International, GEW, REA JET, Domino, Astronova Trojan, and Zünd. I work under contract with distributors Animat (Meech) and Sportera (Zünd, Eurolaser), and collaborate with a network of specialized engineering partners.
Yes. Beyond maintenance, I offer process analysis and optimization consulting: identifying bottlenecks, recommending automation upgrades, performing software updates to improve efficiency, energy optimization of existing systems, and advising on new equipment purchases. The goal is not just to repair, but to improve throughput and reduce operating costs.
Static electricity builds up on fast-moving webs and sheets during printing, converting, and packaging processes. It causes material misfeeds, dust attraction, ink transfer problems, and operator shocks. I install and maintain Meech static control systems — including Hyperion™ ionising bars for charge neutralization, CyClean™ non-contact web cleaners for particle removal on roll-to-roll applications, and VacClean™ vacuum-based cleaning systems. Proper static elimination improves print quality, reduces waste, and increases production speed.
I am authorized for installation and maintenance of Zünd digital cutting systems, including the G3, S3, D3, and Q-Line series — modular flatbed cutters used in signage, packaging, textiles, and composites. I also service Eurolaser CO2 laser cutting systems for non-metallic materials. My work covers complete machine installation, initial commissioning, blade and tool calibration, software configuration, preventive maintenance, and troubleshooting.
Preventive maintenance covers scheduled inspections, cleaning, lubrication, and calibration of mechanical, electrical, and pneumatic systems. I check wear parts, tighten connections, verify sensor alignments, test safety interlocks, and document machine condition. The goal is to catch problems before they cause unplanned downtime — extending equipment life and reducing emergency callouts.
Static charges build up naturally on fast-moving webs, films, and sheets during printing and converting. They cause dust attraction, material misfeeds, ink transfer defects, and operator shocks. Static control systems — like Meech Hyperion™ ionising bars and CyClean™ web cleaners — neutralize these charges and remove surface particles. Proper static management is critical for print quality, waste reduction, and production speed in flexo, digital, and converting operations.
Yes. I completed factory training at ABG International and have extensive field experience with the Digicon Series 3 (die-cutting, slitting, rewinding), Omega SR and SRI (semi-rotary converting), Vectra (turret rewinders), Horizon (inspection), and FleyeVision (100% print inspection). I handle diagnostics, servo drive calibration, web tension adjustments, blade setup, and preventive maintenance across the ABG product range.
I am factory-trained on GEW UV curing systems including AeroLED (LED UV), LeoLED, and conventional arc lamp systems (E2C, E4C, VCP). My work covers lamp replacement, reflector cleaning, shutter calibration, power supply diagnostics, and integration of UV systems into flexo and digital printing lines. I also handle UV system upgrades from conventional mercury lamps to LED UV technology.
Yes. I am factory-trained on the Domino N610i digital inkjet printing press — a high-speed UV inkjet system widely used in narrow-web label production. My work covers print head maintenance and replacement, ink system servicing, color calibration, and integration troubleshooting. I also service the Domino K600 series and related industrial DOD and inkjet marking systems used in packaging and coding applications.
I actively perform field service across Slovenia, Croatia, and the wider Central/Eastern Europe region: Slovenia, Croatia, Serbia, Bosnia and Herzegovina, Montenegro, North Macedonia, Albania, Bulgaria, Hungary, Slovakia, Czechia, and Poland. Based in Petrovče near Celje, Slovenia, I have excellent road and air connections to the entire region.
For critical production stoppages in Slovenia, I can typically arrive within 2-4 hours. Standard interventions are scheduled within 24 hours. For regional callouts across the Central/Eastern Europe, response time is 24-48 hours depending on location. Customers with a maintenance contract receive 24/7 priority emergency support.
Regular working hours are Monday-Friday, 7:00-15:00. Weekend and holiday interventions are available exclusively for maintenance contract holders and for critical production failures requiring immediate attention. Planned maintenance is always scheduled during standard business hours.
I serve a wide range of industries where precision machinery requires expert maintenance: printing and packaging (flexo, digital, offset), label and converting, textile and signage (digital cutting, laser cutting), food and pharmaceutical packaging, and general industrial manufacturing. My experience spans narrow-web label presses, wide-format cutting tables, UV curing systems, inkjet printing, and static control installations.
I communicate fluently in Slovenian (native), English, and German. I also have technical working proficiency in Croatian and Serbian. This covers communication needs across my entire operational area of 12 countries in Central and Eastern Europe — from client briefings and operator training to technical documentation and reporting.
I am based in Petrovče near Celje, Slovenia and actively service 12 countries: Slovenia, Croatia, Serbia, Bosnia and Herzegovina, Montenegro, North Macedonia, Albania, Bulgaria, Hungary, Slovakia, Czechia, and Poland. For critical breakdowns in Slovenia, I can be on-site within 2-4 hours. Regional callouts typically take 24-48 hours including travel. Air connections from Ljubljana and Graz extend my reach across the region.
Pricing is transparent and agreed upfront. Diagnostics and repairs are billed at an hourly rate. Preventive maintenance uses a fixed price by agreement. Larger projects — control cabinet assembly, system installations, module retrofits — are quoted as a project price. Travel costs are calculated by distance, and materials are charged at purchase price plus a small overhead. I always provide a written quote before starting work.
All completed work carries a 6-12 month warranty depending on the scope. Installed spare parts are covered by the manufacturer's original warranty. If a fault occurs due to my work, I provide free correction at no additional cost. Every intervention is documented in detail for full traceability.
Yes. I offer tailored maintenance contracts that include: regular inspections on a monthly, quarterly, or annual schedule, preventive replacement of wear parts, priority 24/7 emergency support, fixed monthly costs for predictable budgeting, and detailed logging of every intervention and equipment condition. Preventive maintenance significantly reduces unplanned downtime and extends equipment lifespan.
To prepare effectively, I need: a clear problem description (phone or email), access to machine documentation if available, a contact person on-site, safety information for hazardous environments, and a preferred time window for the intervention. Sending photos or video of the fault beforehand helps with preliminary diagnosis and faster resolution.
Yes. My expertise in industrial electronics, PLC programming, and mechanical systems applies broadly across manufacturers. If your equipment involves standard industrial components — servo drives, PLCs, HMI panels, pneumatics, or electrical systems — I can likely diagnose and repair it regardless of brand. Contact me with the details and I will assess whether I can help.
Yes. Alongside industrial services, I build custom websites and web applications using Pulse Engine — a proprietary PHP framework developed in-house. For websites, I use Pulse Flow (one-page sites) and Pulse Atlas (multi-page sites) — both flat-file, zero-database, zero-CMS, delivering sub-50ms page loads and 90+ Lighthouse scores with built-in multi-language support and SEO-first architecture. For web applications, Pulse Forge provides a full application framework with database support, module routing, and dashboard interfaces — ideal for internal tools, data management, and business applications. No WordPress, no third-party plugins, no maintenance burden.
Zünd modular flatbed cutters process a wide range of materials: vinyl, foam board, corrugated cardboard, textiles, leather, composites, rubber, gasket materials, and thin metals. Different tool modules — oscillating knife, drag knife, router, punch, and crease wheel — allow precision cutting of materials from 0.1 mm films to 50+ mm rigid boards. I handle installation, tool calibration, and ongoing maintenance of the full G3, S3, D3, and Q-Line range.
Eurolaser CO2 laser systems cut and engrave non-metallic materials with high precision and clean edges — no tool wear, no mechanical contact. Typical materials include acrylics, textiles, wood, MDF, leather, foam, paper, and filter media. Applications range from signage and architectural models to industrial gaskets and textile production. I service the full Eurolaser range from compact System L units to large-format 3XL textile systems.
Hyperion™ ionising bars neutralize static charges on surfaces by emitting positive and negative ions — they solve material handling problems (misfeeds, sticking, sparks) but do not remove particles. CyClean™ non-contact web cleaners use boundary layer technology to lift and vacuum loose particles from moving webs — they solve contamination problems (dust spots, print defects). Many installations combine both: Hyperion bars to neutralize static followed by CyClean units to remove debris.
